Need help?Do you have a question about the Sennheiser evolution wireless G4 300 Series and is the answer not in the manual?
General| Modulation | Wideband FM |
|---|---|
| Switching Bandwidth | 42 MHz |
| Total Harmonic Distortion (THD) | < 0.9% |
| Operating Temperature | -10 °C to +55 °C |
| Signal-to-Noise Ratio | > 110 dB(A) |
| Operating Range | Up to 100 meters (330 feet) |
| Battery Life | Up to 8 hours (with AA batteries) |
| Weight | Dependent on specific transmitter and receiver. See individual product specifications. |
| Frequencies | 516 - 865 MHz (region dependent) |
| RF Output Power | 30 mW |
| Receiver Principle | Diversity |
| Antenna Input | BNC |
| Audio Output | XLR, 6.3 mm jack |
| Power Supply | 12 V DC |
| Dynamic Range | 120 dB |
| Operating Time | Up to 8 hours (with 2 AA batteries) |
| Power Supply (Transmitter) | 2 AA batteries |
| Weight (Transmitter) | 95 g (without battery) |
General introduction to product information within the manual.
Details about microphone modules and cables for transmitters.
Lists compatible headset and lavalier microphones.
Describes cables for connecting instruments and line sources.
Information on BA 2015 battery and L 2015 charger.
Details the charging adapter for specific transmitters.
Covers rack mount kits for secure installation.
Lists antennas, splitters, and amplifiers.
Includes items like color labeling sets and microphone clamps.
Describes the remote mute switch for transmitters.
Guides on setting up and connecting the wireless devices.
Details the connection sockets on the rear of the EM 300-500 G4.
Instructions for connecting and disconnecting power.
How to set up a network connection for monitoring and control.
Guides on connecting audio outputs.
Instructions for connecting rod antennas to the receiver.
Information and CAUTION regarding rack mounting.
Steps for mounting one receiver unit in a 19" rack.
Procedures for mounting two units adjacent in a rack.
How to insert and remove batteries for the handheld transmitter.
Explains how to read battery charge status.
Steps for changing the microphone module on the transmitter.
Instructions for customizing the transmitter with colored rings.
How to insert and remove batteries for the handheld transmitter.
Explains how to read battery charge status.
Steps for changing the microphone module on the transmitter.
Instructions for customizing the transmitter with colored rings.
How to insert and remove batteries for the bodypack transmitter.
Explains how to read battery charge status.
Guides on connecting microphones to the bodypack transmitter.
Guides on connecting instruments/sources to the bodypack.
How to connect the remote mute switch.
Instructions on using the belt clip to attach the transmitter.
How to insert and remove batteries for the bodypack transmitter.
Explains how to read battery charge status.
Guides on connecting microphones to the bodypack transmitter.
Guides on connecting instruments/sources to the bodypack.
Instructions on using the belt clip to attach the transmitter.
Details the connection sockets on the rear of the ASA 214.
Instructions for connecting and disconnecting power.
Information on compatible receivers and how to connect them.
Guides for connecting remote and rod antennas.
Table showing cable lengths and amplifier requirements.
Options for setting up multi-channel antenna systems.
Information and CAUTION regarding rack mounting.
Steps for mounting one ASA 214 in a 19" rack.
Procedures for mounting two units adjacent in a rack.
Instructions for operating the various components of the series.
Identifies and describes the controls on the front panel.
Step-by-step guide to powering the receiver on and off.
How to mute and unmute the audio signal from the receiver.
Instructions for connecting and using headphones.
Explains how to activate and deactivate the lock-off feature.
Describes the information shown on the display panel.
Explains how to use buttons to navigate the receiver's menu.
Describes the default display screens after startup.
Details the parameters shown in the standard receiver display.
Details the parameters shown in the standard transmitter display.
Explains the display used for checking transmission quality.
Overview of configurable settings within the receiver menu.
Visual representation of the receiver's menu hierarchy.
Instructions for adjusting the squelch threshold.
Guides on scanning for unused frequencies and setup.
How to set up frequencies for multiple radio links simultaneously.
How to adjust receiving frequency by bank and channel.
Instructions for entering a name for the radio link.
How to set the audio output level.
Instructions for adjusting the frequency response of the output signal.
How to activate or deactivate the auto lock-off function.
Access point for advanced configuration settings.
Identifies and describes the controls on the handheld transmitter.
Guide to powering the transmitter on and off.
How to mute the audio signal using the MIC button.
Ways to deactivate the RF signal transmission.
How to activate and deactivate the lock-off feature.
Describes information shown on the transmitter display.
How to choose between different standard display modes.
Explains how to navigate the transmitter's menu.
Overview of configurable settings within the transmitter menu.
Adjusting the input sensitivity (AF audio level).
Manually selecting a frequency bank and channel.
Entering a name for the radio link.
Switching the automatic lock-off function on and off.
Identifies and describes the controls on the bodypack transmitter.
Describes information shown on the transmitter display.
Explains the meaning of the operation and battery indicator LED.
Explains the function of the audio overload indicator.
Function of the UP button for menu navigation.
Function of the SET button for menu navigation.
Function of the DOWN button for menu navigation.
Controls for switching on/off and menu escape.
Location and function of the IR interface.
Controls for deactivating RF and audio signals.
Socket for connecting a remote mute switch.
Guide to powering the transmitter on and off.
How to mute the audio signal using the MUTE switch.
Ways to deactivate the RF signal transmission.
How to activate and deactivate the lock-off feature.
Describes information shown on the transmitter display.
Displays the audio level with peak hold function.
Shows the configured transmission frequency.
Displays the freely selectable name of the receiver.
Indicates if the RF signal is being transmitted.
Shows if the lock-off function is activated.
Indicates if the audio signal is muted.
Shows if pilot tone transmission is activated.
How to choose between different standard display modes.
Explains how to navigate the transmitter's menu.
Overview of configurable settings within the transmitter menu.
Adjusting the input sensitivity (AF audio level).
Manually selecting a frequency bank and channel.
Entering a name for the radio link.
Switching the automatic lock-off function on and off.
Identifies and describes the controls on the bodypack transmitter.
Guide to powering the transmitter on and off.
How to mute the audio signal using the MUTE switch.
Ways to deactivate the RF signal transmission.
How to activate and deactivate the lock-off feature.
Describes information shown on the transmitter display.
How to choose between different standard display modes.
Explains how to navigate the transmitter's menu.
Overview of configurable settings within the transmitter menu.
Adjusting the input sensitivity (AF audio level).
Manually selecting a frequency bank and channel.
Entering a name for the radio link.
Switching the automatic lock-off function on and off.
Identifies and describes the controls on the front panel.
Guide to powering the antenna splitter on and off.
Lists EM 300-500 G4 variants made in Germany and USA.
Lists SKM 300 G4 variants made in Germany and USA.
Lists SKM 500 G4 variants made in Germany and USA.
Lists SK 300 G4 variants made in Germany and USA.
Lists SK 500 G4 variants made in Germany and USA.
RF and AF characteristics, overall device specs.
RF and AF characteristics, overall device specs.
RF and AF characteristics, overall device specs.
RF and AF characteristics, overall device specs.
RF and AF characteristics, overall device specs.
Specifications for the ASA 214 antenna splitter.
Pinout for 3.5mm stereo jack, headphone/earphone cables.
Pinout for 3.5mm mic jack, lavalier/headset mics.
Pinout for 3.5mm line jack, instrument cables.
Pinout for 6.3mm balanced stereo jack.
Pinout for 6.3mm mono jack.
Pinout for 6.3mm stereo jack headphone input.
Pinout for balanced XLR-3 plug.
Pinout for power supply connection.
Instructions for cleaning the microphone module's sound inlet basket.
To Next Page