To Next PageTo Next Page
Need help?Do you have a question about the Sennheiser XS WIRELESS 1 DUAL Series and is the answer not in the manual?
General| Modulation | Wideband FM |
|---|---|
| Transmitter Type | Handheld or Bodypack |
| Transmitter Battery Life | Up to 10 hours |
| Battery Life | Up to 10 hours |
| RF Output Power | 10 mW |
| System Type | Wireless Microphone System |
| Audio Frequency Response | 20 Hz - 20 kHz |
| Dynamic Range | > 100 dB |
| Signal-to-Noise Ratio | ≥ 103 dBA |
| THD | < 0.9% |
| Operating Range | Up to 75 m |
| Wireless Range | Up to 100 meters (line of sight) |
| Receiver Type | Diversity |
| Receiver Output Connectors | XLR |
| Receiver Power Source | DC 12V |
| Transmitter Microphone Element | Dynamic or Condenser |
| Transmitter Polar Pattern | Cardioid |
| Transmitter Battery Type | 2 x AA |
| Charging Time | Not Specified by Manufacturer |
Connect receiver via XLR-3 or 6.3 mm audio cables for audio output.
Instructions for powering the device on and off correctly.
Key indicators and information shown on the receiver display.
Adjust audio output level and activate mute function.
Visual cues to identify low battery levels on the receiver.
Procedure for automatically scanning and selecting frequencies.
Steps for manually setting the bank and channel for frequency.
How to synchronize the receiver with the transmitter.
Adjusting the input sensitivity level for optimal signal.
Setting up multiple channels for multichannel system operation.
Setting the squelch level to minimize background noise.
Recommended minimum distance between receiver and transmitter.
