Do you have a question about the Sennheiser XSW 1-825-A and is the answer not in the manual?
Microphone type | Handheld microphone |
---|---|
Microphone frequency response | 80 - 14000 Hz |
Microphone transducer principle | Dynamic microphone |
Receiver type | - |
Receiver display | Yes |
Sensitivity | 3 μV |
Channels quantity | 10 channels |
Switching bandwidth | 24 MHz |
Operating temperature (T-T) | 0 - 40 °C |
Signal-to-Noise Ratio (SNR) | 103 dB |
Total Harmonic Distortion (THD) | 0.9 % |
Number of microphones included | 1 |
Battery type | AA |
Number of batteries supported | 2 |
Country of origin | Taiwan |
Master (outer) case width | 280 mm |
Master (outer) case height | 360 mm |
Master (outer) case length | 390 mm |
Master (outer) case weight | 5163 g |
Harmonized System (HS) code | 85181000 |
Shipping (inner) case weight | 1449 g |
Quantity per master (outer) case | 3 pc(s) |
Package depth | 348 mm |
---|---|
Package width | 345 mm |
Package height | 86 mm |
Receiver weight | 340 g |
Receiver dimensions (WxDxH) | 200 x 127 x 42 mm |
Lists all items included in the XS WIRELESS 1 package for user verification.
Covers battery status, power on/off, display information, volume adjustment, and initial setup.
Details automatic scanning and manual selection of radio frequencies for optimal performance.
Explains how to sync the transmitter and receiver and adjust input sensitivity levels.
Guides on using multichannel features and setting up specific microphones (ME 2-2, ME 3-11).
Provides advice on minimum distance, microphone placement, and adjusting squelch for noise reduction.