Need help?Do you have a question about the Sennheiser XSW 12 - and is the answer not in the manual?
General| Type | Stage/performance microphone |
|---|---|
| RF power | 10 mW |
| Microphone mute | Yes |
| Microphone frequency | 100 - 16000 Hz |
| Microphone direction type | Cardioid |
| Microphone Total Harmonic Distortion (THD) | 1 % |
| Device interface | - |
| Operating frequency | 548 - 572 MHz |
| Connectivity technology | Wireless |
| Battery type | AA |
| Power source | Battery |
| Battery life (max) | 10 h |
| Number of batteries supported | 2 |
| Number of products included | 1 pc(s) |
| Signal-to-Noise Ratio (SNR) | 103 dB |
| Product color | Black |
Weight and Dimensions| Receiver weight | 730 g |
|---|---|
| Microphone weight | 95 g |
| Receiver dimensions (WxDxH) | 200 x 127 x 42 mm |
General safety guidelines for the XS WIRELESS system.
Specific safety instructions for the receiver unit.
Instructions for placing, connecting the receiver to mains, and aligning antennas.
Procedure for inserting or replacing batteries in the SK 20 bodypack transmitter.
Connecting microphones, headmic, or instruments to the bodypack transmitter.
Procedure for inserting or replacing batteries in SKM 35/65 radio microphones.
Instructions for switching the receiver on, off, and into standby mode.
Instructions for switching transmitters on and off, and checking battery status.
Procedure to mute and unmute the transmitters.
Solutions for common operational issues like no RF signal or audio.
To Next Page