To Next PageTo Next Page
Need help?Do you have a question about the Sennheiser XSW 1-825 and is the answer not in the manual?
General| Microphone Type | Dynamic |
|---|---|
| Polar Pattern | Cardioid |
| Battery Life | Up to 10 hours |
| RF Output Power | 10 mW |
| Switching Bandwidth | 24 MHz |
| Signal-to-Noise Ratio | ≥ 103 dBA |
| Frequency Range | 548-572 MHz |
| Receiver Type | Diversity |
| Type | Wireless microphone system |
| Modulation | FM |
| THD, total harmonic distortion | < 0.9% |
| Receiver Output | XLR and 6.3 mm jack |
| Power Supply | 12 V DC |
| AF Frequency Response | 50 Hz to 16 kHz |
Lists the different sets and accessories included with the XS Wireless 1 system.
Illustrates how to insert batteries and estimated battery life for the system.
Shows how to connect the receiver using XLR-3 and 6.3mm audio output jacks.
Details connecting microphones ME 2-2, e 908T, ME 3-11, and CI 1-N.
Explains the correct procedure for turning the system on and off.
Describes the receiver display elements: Bank, Channel, and Frequency.
Guides on setting the receiver's sensitivity level for optimal audio input.
Instructions for automatically scanning and selecting frequencies.
Steps for manually setting the desired Bank and Channel frequencies.
Illustrates the process for synchronizing the transmitter and receiver.
Visual guide to receiver sensitivity settings from 0 dB to -30 dB.
Guidance on setting up and operating multiple XS Wireless 1 systems simultaneously.
Recommendations for optimal placement of ME 2-2 and ME 3-11 microphones.
Shows recommended minimum distances for SKM transmitters and guitar pickups.
Instructions on adjusting the squelch to minimize RF interference.
