Using the EM 300-500 G4
89
Setting options in the menu
In the EM 300-500 G4 menu, you can configure the following settings.
Adjusting the squelch threshold
▷ See “Squelch menu item”
Scanning for unused frequency presets, releases and selects frequen-
cy presets
▷ See “Easy Setup menu item”
Setting the frequency bank and the channel
▷ See “Frequency Preset menu item”
Entering a freely selectable name
▷ See “Name menu item”
Adjusting the audio output level
▷ See “AF Out menu item”
Adjusting the frequency response of the output signal
▷ See “Equalizer menu item”
Activating/deactivating automatic lock-off function
▷ See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
• Setting the receiving frequencies for the frequency banks U1 to U6
• Activating/deactivating the parameters to be transferred to the trans-
mitters
• Activating/deactivating the pilot tone evaluation
• Activating/deactivating warnings
• Adjusting the contrast of the display panel
• Resetting the receiver
• Adjusting the network configuration
• Displaying the current software revision
▷ See “Advanced menu item”
To Next Page