Sennheiser 500643 - Removing and Connecting Audio Cable

13
Removing and connecting audio cable
To use the headphones strictly to dampen noise, you
can remove the audio cable (see illustration).
To remove the audio cable:
왘 Pull the plug of the audio cable  out of
connection  in the direction of the arrow.
To reconnect the audio cable:
왘 Plug the plug of the audio cable  into the
connection  in the direction of the arrow.
쐋
PXC450_517600_0806_SP6.book Seite 13 Donnerstag, 13. September 2007 10:26 10