Sennheiser CXC 700 - Page 18

CXC 700 | 17
Using the CXC 700
Step 2b, left earphone: Press and hold
the TalkThrough button and slide the
NoiseGard switch to ON. Keep the
button pressed until you hear two
beeps and the LED flashes rapidly
(approx. 5 seconds). Proceed to step 3.
Adapting NoiseGard and storing the
setting
Step 3: Press the TalkThrough button or
the Mode button to individually adapt
NoiseGard to your needs. You hear a
beep when the maximum or minimum
setting is reached.
ON
R
2a
5s
ON
2b
5s
L