18 | CXC 700
Using the CXC 700
When you have adjusted NoiseGard so
that external noise is optimally iso-
lated, wait until you hear a beep and
the LED lights up (approx. 10 seconds).
The settings are stored.
Resetting the factory default settings
왘 Slide the NoiseGard switch to OFF to
switch NoiseGard off.
왘 Simultaneously press and hold the
Mode button and the TalkThrough
button and slide the NoiseGard
switch to ON. Keep the buttons
pressed until you hear three beeps
(approx. 5 seconds). The NoiseGard
settings are reset to the factory
default settings.
3
To Next Page
Loading...
