Cleaning and maintaining the headset system
32
Cleaning and maintaining the
headset system
왘 Before cleaning, switch the product off and disconnect the base station
from the mains power supply.
왘 Only use a dry and soft cloth to clean the product.
왘 Clean the charging contacts of the base station and the charging
contacts or of the headset from time to time using e.g. a cotton
swab.
CAUTION Damage to the product due to liquids!
Liquids entering the product can short-circuit the electronics
or damage the mechanics.
Solvents or cleansing agents can damage the surface of the
product.
왘 Keep all liquids far away from the product.
왘 Do not use any solvents or cleansing agents.
8
C
To Next Page
Loading...
