8 | EKI 830
Using the EKI 830
Using the EKI 830
Connecting headphones or an induction coupler
The 3.5 mm jack socket of the receiver allows you to connect
• headphones such as the Sennheiser HD 410/1029, PX 90,
PMX 60/90, GP 03,
• an induction coupler such as the Sennheiser EZT 3011 induction loop
or the EZI 120 induction plates or
• a connection cable with 3.5 mm jack plug to your hearing aid.
Connecting headphones
왘 Connect the 3.5 mm jack plug of the headphones to the socket of the
receiver.
Connecting the induction loop
왘 Carefully remove the clip from the receiver.
왘 Attach the clip of the induction loop as shown.
왘 Connect the 3.5 mm jack plug of the induction loop to the socket of
the receiver.
EKI830.book Seite 8 Donnerstag, 10. Mai 2012 2:02 14
To Next Page
