evolution wireless g 100 Series
RF Wireless Systems | evolution wireless g
Optional Accessories
j
CC2 carrying case for complete systems Cat. No. 009826
j
MMD 935 microphone head (dynamic, cardioid) for SKM 100 g Cat. No. 021827
j
MZW 1 windshield for SKM 100 g Cat. No. 004839
j
KEN colour-coded identification caps for SKM 100 g
j
BA 2015 accupack for EK 100 g, SK 100 g, SKP 100 g, SKM 100 g Cat. No. 009950
j
L 2015 charger for BA 2015 accupack Cat. No. 009828
j
DC 2 power adaptor for EK 100 g and SK 100 g Cat. No. 009827
j
POP 1 plug-on pouch for SKP 100 g Cat. No. 005232
j
GA 2 19“ rack adaptor Cat. No. 009823
j
AM 2 antenna mount Cat. No. 009912
j
A 1031-U passive omni-directional antenna Cat. No. 004645
j
A 2003-UHF passive directional antenna Cat. No. 003658
j
AB 2 antenna booster
AB 2-A: 518–554 MHz Cat. No. 009817
AB 2-B: 626–662 MHz Cat. No. 009818
AB 2-C: 740–776 MHz Cat. No. 009819
AB 2-D: 786–822 MHz Cat. No. 009820
AB 2-E: 830–866 MHz Cat. No. 009821
j
ASP 2 antenna splitter Cat. No. 009824
j
NT 1 plug-in mains unit for ASP 2
NT 1 Cat. No. 004786
NT 1-120 Cat. No. 004787
NT 1-UK Cat. No. 004788
General Description
Every system of the ew 100 g series is available with either the EM 100 g rack-
mount receiver or the EK 100 g portable receiver. The EM 100 g true diversity
receiver is at the heart of the 100 g series systems. The EK 100 g portable receiver
is the ideal choice for camcorder use. The SKM 100 g hand-held transmitter is avail -
able with a choice of three different microphone heads. The SKP 100 g plug-
on transmitter converts any wired micro phone into a radiomicrophone and the
SK 100 g bodypack transmitter is the perfect companion for the ME 2 or ME 4 clip-
on microphones, the ME 3 headmic or guitar cables. Transmitters and receivers of
the 100 g series have nine frequency banks with 4 presets each for direct channel
selection. The receivers feature a scan function that automatically scans the selected
frequency bank for free frequencies. Transmitters and receivers have large backlit
displays with peak-hold display. The EM 100 g‘s audio outputs are available both as
balanced XLR and 1/4“ sockets.
Technical Data
System
Frequency ranges ............. 518–554, 626–662, 740–776,
786–822, 830–866 MHz
Transmission/receiving frequencies.......................... 1,440
Compatible frequencies per frequency bank ................... 4
Compander ........................................................................HDX
Signal-to-noise ratio ...................................................110 dB
Audio frequency response............................40–18,000 Hz
Pilot tone squelch.................................can be switched off
Receiver
Scan function..............receivers scan one frequency bank
Adjacent channel rejection...................................... > 65 dB
Intermodulation attenuation ................................. > 65 dB
Sensitivity (with HDX, at peak
deviation, 52 dBA
rms
S/N) ....................................... < 2.5 µV
Max. AF output voltage............ XLR, bal.: –24 to +18 dBu
6.3 mm jack, unbal.: –30 to +12 dBu
(adjustable in steps of 6 dB)
Dimensions .................... rack-mount: 212 x 145 x 38 mm
portable: 82 x 64 x 24 mm
Operating time of portable receiver .......................> 8 hrs
Weight of portable receiver.......................... approx. 158 g
Transmitter
RF output power (50 Ω) ................................... typ. 30 mW
Max. input voltage
(unbalanced, peak deviation).......................... mic: 1.8 V
rms
line: approx. 2.4 V
rms
Max. SPL of microphone head....................approx. 154 dB
Input impedance.............................. mic: 10 kΩ, line: 1 MΩ
Operating time ............................................................> 8 hrs
Dimensions .............................bodypack: 82 x 64 x 24 mm
hand-held: Ø 50 x 225 mm
plug-on: 105 x 43 x 43 mm
Weight (incl. batteries)..............bodypack: approx. 158 g
hand-held: approx. 450 g
plug-on: approx. 195 g
To Next Page
Need help?
General
