24
Adjusting settings via the operating menu
Setting a transmission frequency for the current channel
Set the desired frequency.
Selecting a frequency bank and a channel and assigning
this channel a frequency
Set the desired frequency bank.
Set the desired channel.
Set the desired frequency.
Move the multi-function switch until the “Tune”
menu item appears.
Press the multi-function switch.
The frequency selection appears.
Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
Move the multi-function switch until the “Tune”
menu item appears.
Press the multi-function switch until the
frequency bank selection appears.
Press the multi-function switch.
The frequency selection appears.
Press the multi-function switch.
The frequency selection appears.
Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
543.200 MHz
Tune
544.200 MHz
B.Ch: U1. 1 B.Ch: U1. 1
Tune
Advanced
Menu
Tune
543.200 MHz
Select the MHz
value and confirm
Select the kHz
value; store the
setting
Call up “Tune”
“Stored”
543.200 MHz
Tune
B.Ch: U1. 1 B.Ch: U1. 1
Tune
Advanced
Menu
Tune
543.200 MHz
543.200 MHz
Set the frequency
bank and the channel
Set the frequency;
store the setting
Call up “Tune”
(special function)
“Stored”
To Next Page
Loading...
