Do you have a question about the Sennheiser ew 135 and is the answer not in the manual?
Frequency Range | 516-865 MHz |
---|---|
Microphone Type | Dynamic |
Polar Pattern | Cardioid |
Battery Life | Up to 8 hours |
Audio Frequency Response | 80 Hz - 18 kHz |
RF Frequency Range | 516 - 865 MHz |
Preset Frequencies | 12 |
Switching Bandwidth | 42 MHz |
Compander | HDX |
THD | < 0.9 % |
Receiver Housing | Metal |
Microphone Input Sensitivity | 1.5 mV/Pa |
Max. Operating Range | 100 m |
Pilot Tone Squelch | Yes |
Transmitter Type | Handheld |
Signal-to-Noise Ratio | > 110 dB |
Modulation | FM wideband |
Temperature Range | -10 °C to +55°C |
Receiver Principle | Diversity |
Microphone Power Supply | 2 x AA batteries |
Power Supply | 12 V DC |
Highlights key features like auto frequency management, UHF tuning, interchangeable microphone heads, and HDX compander for clear audio.
Details new features such as infrared sync, enhanced frequency banks, wider bandwidth, improved range, soundcheck mode, and integrated EQ.
Covers robust metal housing, intuitive displays, battery management, extended operating time, and rack-mounting suitability.
Details receiver principles, sensitivity, adjacent channel rejection, intermodulation attenuation, blocking, and output characteristics.
Outlines RF output power, AF frequency response, power supply, nominal voltage, operating time, dimensions, and weight for the handheld transmitter.
Lists the essential items included in the vocal set, such as the rack-mount receiver, handheld transmitter, and microphone clip.