9
Associating the earphones to the transmitter
(Pairing)
The MX W1 earphones and transmitter are already paired on
delivery.
To enable wireless transmission, both the earphones and the
transmitter have to recognize each other:
1. Enrollment mode
After switch-on, a suitable device is searched.
2. Association mode
If a suitable device is detected, both devices will exchange
device identification information.
3. Pairing mode
If the exchange of device identification information is possible,
the devices automatically try to connect.
1s0 2s
1s0 2s
5s0 10s
To Next Page
Loading...
