Need help?Do you have a question about the Sennheiser RS 110 II and is the answer not in the manual?
Lists all items included in the Sennheiser RS 110 II headphone system package.
Connects the transmitter to an audio source and power outlet for initial setup.
Details on opening battery compartments and inserting AAA batteries into the headphones.
Instructions for powering on the audio source and how the transmitter syncs.
Guidance on setting the initial volume on the headphones and adjusting to the desired level.
Tips for improving signal quality using the TUNE control and managing interference.
Information regarding the 24-month warranty for the product and contact points.
Lists directives and declarations of conformity for the product.
General| Impedance | 24 Ω |
|---|---|
| Ear coupling | Supraaural |
| Headphone frequency | 22 - 19500 Hz |
| Headphone sensitivity | 106 dB |
| Total Harmonic Distortion (THD) | 0.7 % |
| Modulation | FM |
| Channels quantity | 3 channels |
| Dimensions (WxDxH) | 85 x 110 x 133 mm |
| Maximum input power | 3.06 W |
| Battery low indication | Yes |
| Product color | Black, Silver |
| Wearing style | Head-band |
| LED indicators | Power, Status |
| Recommended usage | Music |
| Signal-to-Noise Ratio (SNR) | 65 dB |
| Package type | Box |
| Package weight | 990 g |
| Battery voltage | 1.8 V |
| Wireless range | 100 m |
| Connectivity technology | Wireless |
| Material | Plastic |
| Microphone type | Not available |
Weight and Dimensions| Weight | 180 g |
|---|
To Next Page
