Operation
31
Operation
Connecting the transmitter to an instrument
You can connect the transmitter either directly to your instrument or using
the extension cable and the belt clip.
►
Direct connection
▷ Plug the transmitter into the jack socket on your instrument.
▷ Align the transmitter so that you can easily see the status LED.
Connection with extension cable
▷ Plug the extension cable into the jack socket on your instrument.
▷ Plug the transmitter into the jack socket on the extension cable.
▷ Insert the transmitter into the belt clip.
▷ Fasten the belt clip to the guitar strap or your clothes, for example on
your belt or waistband.
Connecting the receiver to an amplifier
▷ Plug the receiver’s jack plug into the input socket on your amplifier.
To Next Page
Loading...
