Need help?Do you have a question about the Sennheiser XS Wireless and is the answer not in the manual?
General| RF Output Power | 10 mW |
|---|---|
| Microphone Type | Dynamic |
| Polar Pattern | Cardioid |
| Connector | XLR |
| THD | ≤ 0.9% |
| Power Supply | 2 x AA batteries |
| Modulation | FM |
| Charging Time | Not applicable |
| Operating Range | Up to 75 m |
| Dimensions (Microphone) | 46 x 170 mm |
Lists the components included in the Vocal Set packaging.
Instructions for connecting the transmitter and receiver for the vocal set.
How to switch units on/off, hold microphone, and mute audio.
Checking charge levels, charging batteries, and pairing devices.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the Lavalier Set packaging.
How to connect the clip-on microphone to the transmitter and receiver to camera.
How to switch units on/off, and mute audio for the lavalier set.
Checking charge levels, charging batteries, and pairing devices.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the Presentation Base Set packaging.
Instructions for connecting the microphone to the transmitter and receiver to console.
How to switch units on/off, and mute audio for the presentation set.
Checking charge levels, charging batteries, and pairing devices.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the XLR Base Set packaging.
How to connect the transmitter to the microphone and receiver to console.
How to switch units on/off, hold the microphone, and mute audio.
Checking charge levels, charging batteries, and pairing devices.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the Instrument Base Set packaging.
How to connect the transmitter directly or via extension cable to an instrument.
Instructions for connecting the receiver to an amplifier or pedalboard device.
How to switch units on/off, and mute audio for the instrument set.
Checking charge levels, charging batteries, and pairing devices.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the Pedalboard Set packaging.
How to connect the transmitter to an instrument and receiver to amplifier/console.
Methods for attaching receiver, switching units, and muting audio.
Checking charge levels, charging batteries, and pairing devices.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the Portable Interview Set packaging.
How to connect the transmitter to microphone and receiver to camera.
How to switch units on/off, hold microphone, and mute audio.
Checking charge, charging batteries, pairing, and adjusting camera input level.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the Portable Lavalier Set packaging.
How to connect the clip-on microphone to the transmitter and receiver to camera.
How to switch units on/off, and mute audio for the portable lavalier set.
Checking charge, charging batteries, pairing, and adjusting camera input level.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the Portable ENG Set packaging.
How to connect the transmitter to a microphone with an XLR socket.
How to connect the clip-on microphone and receiver to camera.
How to switch units on/off, and mute audio for the portable ENG set.
Checking charge, charging batteries, pairing, and adjusting camera input level.
Resolving common faults and monitoring out-of-range status.
Lists the components included in the Portable Base Set packaging.
How to connect the microphone to the transmitter and receiver to camera.
How to switch units on/off, and mute audio for the portable base set.
Checking charge, charging batteries, pairing, and adjusting camera input level.
Resolving common faults and monitoring out-of-range status.
To Next Page