Operation
55
Operation
Connecting the clip-on microphone to the transmitter
►
▷ Plug the clip-on microphone’s screw-on jack plug into the jack socket
on the transmitter.
▷ Lock the jack plug by screwing down the coupling ring.
If the jack plug is not firmly locked, crackling noise can appear in the
audio signal.
▷ Insert the transmitter into the belt clip.
▷ Fasten the belt clip to your clothes, for example on your belt or waist-
band.
Attaching the clip-on microphone
►
▷ Fasten the clip-on microphone to your clothes, for example on your col-
lar or lapel.
▷ The distance to your mouth should be about 25 cm. The distance af-
fects the sensitivity of the clip-on microphone. Reduce the distance if
you are speaking at a low volume, and increase it when speaking loudly.
To Next Page
Loading...
