EasyManua.ls Logo

SensAble DORTAG VI User Manual

SensAble DORTAG VI
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Single Door Access Control System
USER MANUAL
DORTAG VI
MIC 0302115
August 2008
Revision 02
Question and Answer IconNeed help?

Do you have a question about the SensAble DORTAG VI and is the answer not in the manual?

SensAble DORTAG VI Specifications

General IconGeneral
BrandSensAble
ModelDORTAG VI
CategoryIP Access Controllers
LanguageEnglish

Summary

INSTALLATION INSTRUCTIONS

Reader Head Specifications

Details reader head cable length restrictions and wiring color code.

Reader Head Installation Guide

Step-by-step instructions for mounting the reader head on a wall.

Dual Reader Head Configuration

Information on installing two reader heads and configuring the Jumper LOOP SELECT.

INSTALLING THE CONTROLLER

Controller Wiring Connections

Details terminal connections for Power, Reader, Aux, and Relay.

Critical Wiring Warning

Warning about potential permanent damage from incorrect wiring.

WIRING DETAILS

Jumper Loop Select Note

Note on Jumper 'LOOP SELECT' fitting for two reader head applications.

Fire Alarm Input Functionality

Explanation of the fire alarm input facility and recommended lock types.

PROGRAMMING INSTRUCTIONS

Auto Exit Functionality

Controller reverts to standard mode if no action is taken within 30 seconds.

Controller Operating Modes

Description of four operating modes indicated by display dot positions.

Programming Interaction Guidance

Explains user actions and controller responses for programming functions.

MASTER TAG PROGRAMMING

Teaching a New Master Tag

Step-by-step process for teaching a new Master Tag to the controller.

Master Tag Voiding Warning

Warning that presenting a new Master Tag voids all existing user tags.

USER TAG PROGRAMMING

Teaching New User Tags

Procedure for teaching new User Tags after the Master Tag is presented.

User Tag Limit Notification

Indicates when the 1000 user limit has been exceeded.

Tag Registration Procedure

Instructions for registering new tags and recording their numbers.

Invalid Tag Handling

Describes the unit's response to invalid or unrecognized tags.

USER TAG VOIDING

Voiding a Specific User Tag

Steps to void a specific User Tag from the system using the controller.

Voiding Mode Display Indications

Explanation of display indicators for voided memory locations.

Exiting User Tag Voiding Mode

Procedure to exit the User Tag Voiding mode.

RELAY OUTPUT TIME PROGRAMMING

Setting Relay Output Duration

Adjusting the time the relay provides output to the door latch.

150ms Pulse Output Configuration

Details a special setting for a 150mS Pulse Output.

LAST TAG READ INSTRUCTION

Viewing Last Tag Read

Instructions on how to display the number of the last tag read.

TECHNICAL SPECIFICATIONS

Hardware Specifications Overview

Covers operating voltage, current, relay rating, frequency, and read range.

Reader Head and Cable Specs

Details reader head count, cable length, and type.

Physical and Environmental Specs

Includes mechanical dimensions, environmental ratings, and operating temperature.

Indications and Warnings

Describes visual/audible indicators and notes on signal interference.

SOFTWARE SPECIFICATIONS

User and Code Details

Specifies the maximum number of users and the code size in bits.

Read Time and Special Features

Details read time and lists special features like auto tracking and dual reader capability.