Need help?Do you have a question about the Sensitron SMART3-R Series and is the answer not in the manual?
Overview of the SMART3-R gas detector, its applications, and compliance standards.
Lists and explains the product naming conventions and selectable gas detection codes for the SMART3-R series.
Detailed specifications including application, sensing element, power supply, output signals, dimensions, weight, and operating conditions.
Diagram and explanation of the SMART3-R circuit board, including components, jumpers, and connectors.
Guidance on optimal positioning of the detector based on gas properties (lighter/heavier than air) for effective detection.
Instructions for connecting the device's relay outputs, detailing normally closed (NC), normally open (NO), and common (COM) contacts.
Specifications for wiring the SMART3-R to RS485 bus lines, covering cable types, impedance, and connection topology.
Guide for connecting the 4-20 mA proportional output, specifying cable size, distance, and shield grounding requirements.
Procedure for connecting the optional remote head to the SMART3-R base unit using the 6-conductor cable.
Describes the detector's power-on sequence, including LED indicators and the initial warmup period.
Details the process for testing the gas detector, including factory calibration and the use of calibration keypads.
Explains the autonomous operation of the detector and the meaning of its frontal LED indicators for status.
Provides guidelines for detector maintenance, performance checks, calibration frequency, and record-keeping.
Details on the STS/CKD+ or STS/CKD-OLED handheld calibration keypad and its functions.
Description of the ZMCAP/123 stainless steel calibration cap adapter for various Sensitron detectors.
General| Brand | Sensitron |
|---|---|
| Model | SMART3-R Series |
| Category | Gas Detectors |
| Language | English |
To Next Page
