Need help?Do you have a question about the Sensitron SMART3G-D2 and is the answer not in the manual?
Details the features of SMART3G-D2 and SMART3G-D3 detectors, including display, LEDs, and relay outputs.
Illustrates the front and inside views of the SMART3G display, showing key components and connection points.
Provides crucial preliminary information and warnings for performing Zero, Span, and 4-20mA output adjustments.
Visual representation of menu navigation for calibration, zeroing, span adjustment, and alarm threshold settings.
Lists common operational errors, their causes, and suggested remedies for the SMART3G display.
General| Gas Type | Combustible, Toxic, Oxygen |
|---|---|
| Sensor Type | Electrochemical, Catalytic, Infrared |
| Output Signal | 4-20 mA, RS-485 |
| Power Supply | 12-30 VDC |
| Enclosure | Aluminum, Stainless Steel |
| Protection | IP66 |
| Certifications | ATEX, IECEx, UL |
| Detection Gases | Methane, Hydrogen Sulfide, Carbon Monoxide, Oxygen |
| Battery Life | Not applicable |
| Weight | 1.5 kg |
| Protection Rating | IP66 |
| Measurement Range | Varies depending on the gas and sensor type (e.g., 0-100% LEL for combustible gases, 0-100 ppm for toxic gases, 0-25% vol for oxygen) |
| Operating Humidity | 0 to 95% RH non-condensing |
To Next Page