Need help?Do you have a question about the Sensitron SMART3G-C3 and is the answer not in the manual?
Describes the SMART3G gas detectors, sensor types, and optional boards.
Explains the detector P/N composition and lists detectable gases.
Details technical specifications like sensing element, ranges, power, outputs, etc.
Covers criteria for hazardous area classification and detector selection.
Explains factory calibration and future adjustment procedures.
Details detector operation, LED indications, and reset procedures.
Lists error messages and their corrective actions for the detector.
General| Power Supply | 12-24 VDC |
|---|---|
| Protection | IP65 |
| Weight | 1.5 kg |
| Protection Rating | IP65 |
| Technology | Catalytic |
| Output Signal | 4-20 mA |
| Housing Material | Stainless Steel |
| Detection Gases | CH4, H2S, O2 |
| Accuracy | ±2% F.S. |
| Response Time | <30 seconds |
| Certifications | ATEX, IECEx |
| Operating Temperature | -20°C to +50°C |
To Next Page