32
SensoLite Nova
OVERVIEW OF FUNCTION MENUS
By keeping the OK button pressed after switching on, meter will offer alternatively six func-
tional modes: calibration screen “CAL”, data download screen “PC”, time set screen “SEt”,
memory data delete screen ”dEL”, measurement unit selection screen ”SEt” and switching
to speaking function screen ”SEt” in case of SensoLite Nova Plus meter. These function
modes will follow each other as you keep pressed the OK button in the same order as they
were mentioned above. To enter one of the function modes, release the OK button when the
desired function's tag is displayed.
SETTING DATE AND TIME
SensoLite Nova meter is used world-wide, therefore it works both with a 12 and a 24 hour
system. It is not able to recognise “leap” years.
Time is displayed in the upper left corner, while date appears in the upper right corner of
screen.
To Next Page
Loading...