SENSORWORX SWX-101 Series

To Next Page

LINE VOLTAGE

WALL SWITCH SENSORS

INSTALLATION & OPERATION INSTRUCTIONS

MODEL # PIR ACOUSTIC PHOTOCELL DEFAULT MODE

SWX-101-xx* • OCC

SWX-103-xx • VAC

SWX-104-xx • VAC

SWX-111-xx • • OCC

SWX-113-xx • • VAC

SWX-121-xx • • OCC

SWX-123-xx • • VAC

SWX-124-xx • • VAC

SWX-131-xx • • • OCC

SWX-133-xx • • • VAC

OVERVIEW

SENSORWORX wall switch sensors detect movement in the infrared energy that

radiates from occupants as they move within the devices eld-of-view. Once occupancy

is identied, the sensor’s internal relay switches power on to the connected lighting.

Units can also be congured to operate in Vacancy Mode (e.g., require lights be manually

switched on). Once lights are on and if equipped with passive dual technology (PIR/

Acoustic), the unit’s microphone is enabled to further enhance detection. An internal timer

is set to keep lights on during brief periods of inactivity and is reset every time occupancy

is signaled by either the passive infrared or acoustic detection technologies. Ambient

daylight detection can also be enabled in the unit so that lights are held off in rooms with

sufcient light contribution from windows or skylights.

SPECIFICATIONS

ELECTRICAL

OPERATING VOLTAGE

120/277 VAC, 50/60 Hz

LOAD RATINGS

MAX: 800W @ 120VAC

1200W @ 277VAC

MIN: None

LOAD TYPES

LED Driver/Lamps

CFL, Electronic/Magnetic Ballasts

(Fluorescent)

Tungsten (Incandescent)

PHYSICAL

SIZE

2.74”H x 1.68”W x 1.39”D

(6.96 x 4.27 x 3.53 cm)

Not Including Mounting Strap

WEIGHT

4.5 oz

MOUNTING

Single Gang Switch Box

ENVIRONMENTAL

OPERATING TEMP

32°F to 122°F (0°C to 50°C)

RELATIVE HUMIDITY

0-95% Non-Condensing,

Indoor Use Only

CODE COMPLIANCE

Wall Switch sensors can be used to

meet many requirements of ASHRAE

90.1(2016), IECC (2015), and Title 24

(2016). In particular, Manual On

(e.g., Vacancy) operation is prescribed

for many building spaces.

FEATURES

ELECTRICAL FEATURES

 Interchangeable Line & Load Wires -

Impossible to Wire Backwards

 Accommodates Neutral (3-wire)

and No-Neutral (2-Wire) Installation

 Electronically Timed Switching

Ensures Long Relay Life

 Compatible with LED, Fluorescent

and Incandescent Lighting

 Meets NEC Guidelines Regarding

Current Leakage

PHYSICAL FEATURES

 Enclosure is 25-40% Shallower than

Other Sensors (< 1” depth into wallbox)

 Unique Bat-Wing Shaped Lens Provides

Enhanced Peripheral Detection

 Self-Grounding Mounting Strap

 Modern Look and Intuitive

Easy-Tap Button

 Rugged Vandal Resistant Lens

 Settings are Adjustable Without Removing

Cover Plate

OPERATIONAL FEATURES

 Wall-To-Wall Passive Infrared

Small Motion Detection

 Passive Acoustic Detection (Optional) -

Prevents False Offs when No Motion is Present

 100% Passive Detection Methods -

No Interference Potential from External Devices

 Ambient Daylight Override Mode Increases

Energy Savings

 Congurable Time Delays and Operating Modes

 Blue Locator LED when Ligths are Off

* xx = color (WH, IV, AL, GY)

Main Page

Need help?

Do you have a question about the SENSORWORX SWX-101 Series and is the answer not in the manual?

Summary

Sensorworx Wall Switch Sensor Guide

Overview of Sensorworx Wall Switch Sensors

General introduction to Sensorworx wall switch occupancy and vacancy sensors.

Technical Specifications

Details on electrical, environmental, physical, and code compliance for the sensors.

Key Product Features

Highlights electrical, physical, and operational features of the wall switch sensors.

Coverage and Installation Procedures

Sensor Coverage Area

Describes the detection range, motion detection capabilities, and acoustic coverage.

Wiring and Installation Guide

Instructions for standard and 3-way wiring, including safety precautions.

Mounting and Configuration Settings

Wall Box Mounting Instructions

Guidance on mounting the sensor in single or multi-gang wall boxes.

Configuration Settings Overview

Steps to access and modify sensor settings like time delays and modes.

Occupancy Time Delay Settings

Configures the time the lights remain on after occupancy is detected.

Operational Modes Configuration

Sets the sensor's behavior: Vacancy, Occupancy, Override, Presentation modes.

Ambient Light Override Settings

Configures the photocell to prevent lights turning on if ambient light is sufficient.

Auto-Sensitivity Settings

Adjusts the PIR sensitivity for initial detection when lights are off.

Microphone Settings

Adjusts the acoustic sensor sensitivity or disables it.

LED Functionality Settings

Controls the blue locator LED and white motion indicator LEDs.

Factory Reset Procedure

Restores the sensor to its original factory default settings.

Operational Notes and Modes

Test Mode Operation

Enables a 5-second time delay for efficient walk testing.

Vacancy Mode Specifics

Details on ambient light override and grace period behavior in Vacancy mode.

Microphone Grace Timer

Keeps the microphone active for 10 seconds after lights turn off for reactivation.