SENSORWORX SWX-101-D Series

To Next Page

LINE VOLTAGE

WALL SWITCH SENSORS

w/ 0-10V DIMMING

INSTALLATION & OPERATION INSTRUCTIONS

MODEL # PIR ACOUSTIC PHOTOCELL DEFAULT MODE

SWX-101-D-xx* • OCC

SWX-103-D-xx • VAC

SWX-104-D-xx • VAC

SWX-111-D-xx • • OCC

SWX-113-D-xx • • VAC

SWX-121-D-xx • • OCC

SWX-123-D-xx • • VAC

SWX-124-D-xx • • VAC

SWX-131-D-xx • • • OCC

SWX-133-D-xx • • • VAC

* XX = COLOR (WH, IV, AL)

OVERVIEW

SENSORWORX wall switch sensors detect movement in the infrared energy that

radiates from occupants as they move within the devices eld-of-view. Once occupancy

is identied, the sensor’s internal relay switches power on to the connected lighting.

Units can also be congured to operate in Vacancy Mode (e.g., require lights be manually

switched on). Once lights are on and if equipped with passive dual technology (PIR/

Acoustic), the unit’s microphone is enabled to further enhance detection. An internal timer

is set to keep lights on during brief periods of inactivity and is reset every time occupancy

is signaled by either the passive infrared or acoustic detection technologies. Ambient

daylight detection can also be enabled in the unit so that lights are held off in rooms with

sufcient light contribution from windows or skylights.

SPECIFICATIONS

ELECTRICAL

OPERATING VOLTAGE

120/277 VAC, 50/60 Hz

LOAD RATINGS

MAX: 800W @ 120VAC

1200W @ 277VAC

MIN: None

LOAD TYPES

LED Driver/Lamps

CFL, Electronic/Magnetic Ballasts

(Fluorescent)

Tungsten (Incandescent)

DIMMING CAPABILITY

0-10 VDC ballasts or drivers compliant

with IEC 60929 Annex E.2

DIMMING LOAD

- 50 mA (sink only)

PHYSICAL

SIZE

2.74”H x 1.68”W x 1.39”D

(6.96 x 4.27 x 3.53 cm)

Not Including Mounting Strap

WEIGHT

4.5 oz

MOUNTING

Single Gang Switch Box

ENVIRONMENTAL

OPERATING TEMP

32°F to 122°F (0°C to 50°C)

RELATIVE HUMIDITY

0-95% Non-Condensing,

Indoor Use Only

CODE COMPLIANCE

Wall Switch sensors can be used to

meet many requirements of ASHRAE

90.1(2016), IECC (2015), and Title 24

(2016). In particular, Manual On

(e.g., Vacancy) operation is prescribed

for many building spaces.

FEATURES

ELECTRICAL FEATURES

 Interchangeable Line & Load Wires -

Impossible to Wire Backwards

 Accommodates Neutral (3-wire)

and No-Neutral (2-Wire) Installation

 Electronically Timed Switching

Ensures Long Relay Life

 Compatible with LED, Fluorescent

and Incandescent Lighting

 Meets NEC Guidelines Regarding

Current Leakage

PHYSICAL FEATURES

 Enclosure is 25-40% Shallower than

Other Sensors (< 1” depth into wallbox)

 Unique Bat-Wing Shaped Lens Provides

Enhanced Peripheral Detection

 Self-Grounding Mounting Strap

 Modern Look and Intuitive

Easy-Tap Button for On/Off, Raise, & Lower

 Rugged Vandal Resistant Lens

 Settings are Adjustable Without Removing

Cover Plate

OPERATIONAL FEATURES

 Wall-To-Wall Passive Infrared

Small Motion Detection

 Passive Acoustic Detection (Optional) -

Prevents False Offs when No Motion is Present

 100% Passive Detection Methods -

No Interference Potential from External Devices

 Congurable Dimming Parameters including

High/Low Trims, Turn on Levels, and Curve Types

 Ambient Daylight Override Mode Increases

Energy Savings

 Blue Locator LED when Ligths are Off

Need help?

Do you have a question about the SENSORWORX SWX-101-D Series and is the answer not in the manual?

Summary

Overview

Specifications

Electrical Specifications

Details electrical parameters like voltage, load ratings, and load types for sensors.

Physical Specifications

Covers physical dimensions, weight, mounting, and environmental operating conditions.

Code Compliance

Information on how the sensors meet building code requirements.

Features

Electrical Features

Key electrical features like wire interchangeability and compatibility with lighting types.

Physical Features

Physical attributes including enclosure depth and design features.

Operational Features

Sensor operational capabilities like detection methods and dimming parameters.

Coverage

Installation

Wiring

Instructions and diagrams for standard and 3-way wiring configurations.

Mounting

Dimming Application Overview

Configuration Settings

Configuration Programming

Step-by-step guide for programming sensor functions using button presses.

Configuration Functions

Lists functions for left, center, and right buttons with their respective settings.

Detailed Function Tables

Time Delay Settings

Details available time delay settings for the sensor's operation.

Operational Modes

Describes various pre-programmed operational modes for energy savings.

Auto On Sensitivity

Settings for PIR sensitivity when lights are off.

Acoustic Sensitivity

Settings for microphone sensitivity and disabling acoustic detection.

LED Function

Configuration options for the sensor's LED indicator.

Restore Factory Defaults

Option to restore all sensor settings to factory defaults.

Ambient Light Override

Ambient Light Settings

Settings for overriding lights based on measured ambient light levels.

Auto-Setpoint Selection

Details on automatically selecting an ambient light setpoint.

Dimming Function Tables

Turn Off Scheme

Settings for how the unit's relay opens and dims output on turn off.

Turn On Dimming Level

Settings for the dimming level when lights turn on.

Low Trim Settings

Defines the minimum dimming level for the sensor.

High Trim Settings

Defines the maximum dimming level for the sensor.

Fade Time Settings

Fade Off Time

Configures the time it takes for lights to dim off.

Fade On Time

Configures the time it takes for lights to fade on.

Manual Dimming Response Curve

Operational Notes

Test Mode

Procedure for entering and using test mode for walk testing.

Vacancy Mode Notes

Specific considerations for vacancy mode operation.

Microphone Grace Timer

Explanation of the grace timer for acoustic detection.