Sensus PolluStat E - Target Day Menu; Archive Menu

Heating / Cooling meter PolluStat E
Installation and operating instructions
M H 4110 INT PolluStat E, page 8
Temperature difference *
Customer specific
number *
Primary M-Bus address
(factory setting: 0) *
Secondary M-Bus
address
(factory setting:
meter serial numbe
r
)
*
5.2 Target day menu
All display items are marked with an arrow
symbol. Display of all stored values on an
adjustable annual target day.
Energy consumption *
Volume *
Consumption tariff 1
(if activated) *
Consumption cooling
energy *
(only for combined
heating /cooling meters)
Consumption of first
external meter *
(optional)
Consumption of second
external meter *
(optional)
Return to selection menu
(depress for 2 seconds)
5.3 Archive menu
All display items are marked with a calendar sheet
symbol. As from the current date, the values on
the turn of the past 16 months are displayed (six-
figure date in the form of dd.mm.yy. below the
main display).
In addition the values for the current month can be
called up. For this purpose “today” has to be
selected for the month.
Select required month by
short keystroke, then
depress key for 2
seconds *
Energy consumption *
Volume *
Consumption tariff 1
(if activated) *
Consumption cooling
energy *
(only for combined heating
/cooling meters)
Consumption of first
external meter *
(optional)
Consumption of second
external meter *
(optional)
Maximum flow rate in
selected month with date
(averaged) *
Maximum flow rate in
selected month with time
(averaged) *
Maximum heating resp.
cooling power in selected
month with date
(
avera
g
ed
)
*
Maximum heating resp.
cooling power in selected
month with time
(averaged) *