6. Technical specification
(1) Depends on wall materials and thicknesses.
(2) Only battery operation, no external voltage applied.
Sentinel HUB compliance
This product is marked with logo and uses radio frequency bands that are harmonized
throughout the European Community and others. Declaration of conformity is located in
the box together with warranty list.
CONTACT
support@sentinelmarine.net
www.sentinelmarine.net
Value
60V
0 - 60V
0 - 30V maximum
-80mV to +80mV
Relay contact
Parameter
Internal environmental sensor
Temperature probe (optional)
Absolute maximum voltage on terminals IN 1, IN 2, RPM IN, +Vbat
Vbat measurement voltage range
Shunt input common mode voltage
Shunt input dierential voltage range
Digital output type
2 A maximumOutput switch current
20 kHzRPM IN maximum input frequency
5VIN 1, IN 2, IN 3 threshold voltage
± 1°CFull range temperature accuracy
± 3% RHFull range humidity accuracy
± 1 hPa at 0-65°CFull range pressure accuracy
± 0.5°CTemperature probe accuracy
-20°C to 105°CTemperature range
1 x CR2032 battery and/or external analog voltagePower supply
-25°C to 60°COperating temperature
0 - 100%Operating humidity
Up to 30 m indoor
(1)
Up to 50 m outdoorWireless operating range
Bluetooth low energy (BLE)Wireless communication protocol
65 mm x 65 mm x 28 mmDimensions
More than two years
(2)
Battery life
To Previous Page
Loading...
General