2
Film and television.
Projection halls.
Art galleries.
Warehouses.
Museums.
Stadiums.
Arenas.
2. Safety Information
Read the following safety information carefully before attempting
to operate or service the meter. Only qualified personnel should
perform repairs.
2-1 Safety Symbols
CE Certification.
This instrument conforms to the following standards:
EN61326: Electrical equipment for measurement, control and
laboratory use.
IEC61000-4-2: Electrostatic discharge immunity test.
IEC61000-4-3: Radiated, radio-frequency, electromagnetic
field immunity test.
IEC61000-4-8: Power frequency magnetic field immunity test.
Tests were conducted using a frequency range of 80-1000MHz
with the instrument in three orientations. The average error for
the three orientations is ±3% at 3V/m throughout the spectrum.
However, between 180-500MHz at 3V/m, the instrument
permissive loss of performance is specified by the
specifications.
To Next Page
Loading...