Senville SENL/12HD/MI User Manual (English)

Other manuals for Senville SENL/12HD/MI

Questions and Answers:

John SalazarJul 30, 2025

What to do if my Senville Air Conditioner does not start?

D
David GeorgeJul 30, 2025
If your Senville Air Conditioner doesn't start, consider these potential causes: * There may be a power cut. Wait for the power to be restored. * The unit might be unplugged. Check that the plug is securely in the wall receptacle. * A fuse may have blown. Replace the fuse. * The battery in the remote controller might be exhausted. Replace the battery. * The timer setting might be incorrect. Wait or cancel the timer setting.

Joshua BentleyAug 15, 2025

Why is my Senville SENL/12HD/MI Air Conditioner not cooling or heating well?

F
forbesjamesAug 15, 2025
There could be several reasons why your Senville Air Conditioner isn't cooling or heating the room effectively: * The temperature setting might be inappropriate. Make sure to set the temperature correctly. * The air filter might be blocked. Clean the air filter. * Doors or windows might be open. Ensure they are closed. * The air inlet or outlet of the indoor or outdoor unit could be blocked. Clear any obstructions and restart the unit. * The compressor 3-minute protection may have been activated. Wait and try again.

Senville SENL/12HD/MI Specifications

General

Cooling Capacity	12000 BTU/h
Heating Capacity	12000 BTU/h
Seasonal Energy Efficiency Ratio (SEER)	19
Refrigerant	R410A
HSPF	10
Operating Temperature (Cooling)	5°C to 43°C
Operating Temperature (Heating)	-15°C to 24°C
Power Supply	1 Phase, 60Hz
Outdoor Unit Dimensions	21.7 in
Noise Level (Indoor)	38 dB
Noise Level (Outdoor)	52 dB
Cooling Area	550 sq ft
Voltage	208-230V
Features	Turbo Mode, Sleep Mode, Timer
Refrigerant Pipe Length (Max)	25m

Summary