Senville SENL/24CD/I - User Manual

16 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

GT

The design and specifications are subject to change without p rior notic e for

product improvement. Consult with the sales agency or manufacturer for details.

SENL/09CD/I

SENL/12CD/I

SENL/18CD/I

SENL/24CD/I

SENL/09CD/O

SENL/12CD/O

SENL/18CD/O

SENL/24CD/O

Questions and Answers

J
Joshua LopezAug 9, 2025
What to do if my Senville Air Conditioner unit does not start?
- P
  Peggy DunnAug 9, 2025
  If your Senville Air Conditioner unit doesn't start, there might be several reasons: * A power outage: Wait for the power to be restored. * The unit may be unplugged: Check that the plug is securely in the wall receptacle. * A blown fuse: Replace the fuse. * The remote controller battery may be exhausted: Replace the battery. * Incorrect timer settings: Wait or cancel the timer setting.
K
Kelly NortonAug 16, 2025
How to fix flashing indicators or error codes on my Senville SENL/24CD/I?
- M
  Martin CervantesAug 16, 2025
  If the OPERATION (RUN) indicator or other indicators on your Senville Air Conditioner continue flashing, or if error codes like E0, E1, E2, E3, P0, P1, P2, P3, F1, F2, or F3 appear, wait about 10 minutes to see if the fault resolves automatically. If not, disconnect the power and reconnect it. If the problem persists, disconnect the power and contact customer service.
S
Shannon DorseyAug 23, 2025
Why is my Senville SENL/24CD/I not cooling or heating the room well?
- B
  Barbara BrownAug 23, 2025
  If your Senville Air Conditioner isn't cooling or heating the room well despite airflow, several factors could be at play. First, ensure the temperature is set correctly. Next, check if the air filter is blocked and clean it if necessary. Make sure all doors and windows are closed. Also, verify that neither the air inlet nor outlet of the indoor or outdoor unit is obstructed; clear any blockages and restart the unit. Finally, the compressor might be in a 3 or 4-minute protection mode, so simply wait it out.
J
johnsonaprilAug 31, 2025
Why does the fuse blow frequently on my Senville Air Conditioner?
- J
  Julia Walter DDSAug 31, 2025
  If the fuse blows or the circuit breaker trips frequently with your Senville Air Conditioner, stop using the air conditioner immediately, disconnect the power, and contact the nearest customer service center.

Summary

Safety Precautions

Warning

Instructions indicating the possibility of death or serious injury to prevent harm or damage.

Caution

Instructions indicating the possibility of injury or damage to property.

Names of Parts

Indoor Unit Parts

Identification of components within the indoor unit of the air conditioner.

Outdoor Unit Parts

Identification of components within the outdoor unit of the air conditioner.

Indication Lamps

Explanation of the operation, timer, and defrost indicator lamps.

Operating Instructions

Special Functions

Details on special features like refrigerant leakage detection and self-cleaning.

Operating Temperature Ranges

Specifies optimal room and outdoor temperatures for cooling, heating, and drying.

Manual Operation

Instructions for operating the unit manually using the control switch.

Airflow Direction Control

Guidance on adjusting vertical and horizontal airflow for comfort.

How the Air Conditioner Works

Explanation of automatic, sleep, cooling, heating, and drying operations.

Care and Maintenance

Before Maintenance

Essential steps to take before cleaning or maintaining the unit.

Cleaning the Unit

Instructions for cleaning the main body of the indoor unit.

Cleaning Air Filters

Procedure for cleaning the air filter and air freshening filter.

Filter Replacement

Steps for replacing the air filter and air freshening filter.

Idle Operation Preparation

Steps for preparing the unit for extended periods of non-operation.

Pre-Season Inspection

Checks to perform before starting the air conditioner for a new season.

Troubleshooting Tips

Normal Operation Sounds

Explanation of sounds that may occur during normal operation.

Troubleshooting Guide

Identifies malfunctions, causes, and recommended solutions for common issues.

Senville SENL/24CD/I Specifications

General

Refrigerant	R410A
Max Pipe Length	82 ft
Max Height Difference	49 ft
Type	Mini-Split
Cooling Capacity	24000 BTU
Heating Capacity	24000 BTU
Power Supply	208-230V, 60Hz
Cooling Area	1000-1200 sq. ft.
Operating Temperature (Cooling)	64°F - 90°F
Operating Temperature (Heating)	5°F - 75°F
Features	Auto Restart, Self-Cleaning, Sleep Mode, Turbo Mode

Related product manuals

Senville SENL/24CD/O

Senville SENL/24CD/IX

Senville SENL/24CD/OX

Preview: Senville SENL/09CD/220/IX

Senville SENL/09CD/220/IX

Preview: Senville SENL/09CD/I

Senville SENL/09CD/I

Senville SENL/12CD/I

Senville SENL/18CD/I

Senville SENL/12CD/O

Senville SENL/12HD/MI

Senville SENL/09CD/OX

Senville SENL/12CD/OX

Senville SENL/18CD/IX