What to do if SeQual Eclipse 1000 shows 'SHUTDOWN CONDITIONS - Power Cartridge Shutdown or hot Power Cartridge'?
If your SeQual Oxygen Equipment shuts down or indicates a hot Power Cartridge without external power, seek an external power source. If the Power Cartridge malfunction continues, contact your dealer/ provider.
What does 'UNIT NEEDS ATTENTION - No Inspiration Detected' mean for SeQual Eclipse 1000?
If your SeQual Oxygen Equipment displays 'UNIT NEEDS ATTENTION - No Inspiration Detected' in Pulse Flow Mode, ensure the tubing does not exceed 7 ft (2.1m). The device will beep after 15 seconds if no inspiration is detected, and after another 15 seconds, it will automatically switch to Continuous Flow Mode.
What does 'SHUTDOWN CONDITIONS - System Malfunction' mean for SeQual Eclipse 1000?
If your SeQual Oxygen Equipment displays a 'System Malfunction' message, contact your dealer/provider and use a backup oxygen supply.
Explains symbols and warnings used in the manual and on the oxygen system.
Lists conditions or situations where the ECLIPSE system should not be used.
Provides critical safety information regarding oxygen therapy.
Details safe practices for operating the ECLIPSE oxygen system.
Outlines safety precautions related to the power cartridge.
Identifies key features and components of the ECLIPSE oxygen system.
Explains the icons, numbers, and indicators on the control panel.
Describes the function of the control buttons and indicators.
Details the meaning of the green, yellow, and red indicators on the panel.
Advises on selecting an appropriate location for the ECLIPSE system.
Provides initial steps and important information before operating the system.
Explains how to power the ECLIPSE system using different sources.
Guides the user through the steps of using the ECLIPSE system.
Outlines routine maintenance tasks performed by technicians and users.
Provides instructions for cleaning and caring for the system by the patient.
General| AC Power | 100-240 VAC, 50/60 Hz |
|---|---|
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Operating Humidity | 10% to 95% non-condensing |
| Battery Life | Up to 5 hours |
| Pulse Dose Settings | 1 to 6 |
| DC Power | 12 VDC |
| Operating Altitude | Up to 10, 000 feet (3, 048 meters) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
To Next Page
