What to do if SereneLife SLACHT128 Air Conditioner displays 'FL'?
If the display panel of your SereneLife Air Conditioner shows 'FL', power off the unit, drain it, and then restart it. This should resolve the issue.
Why does my SereneLife Air Conditioner start frequently?
Your SereneLife Air Conditioner might be starting frequently due to several reasons: * Direct sunlight: Try drawing the curtain. * Open doors and windows or heat sources: Close doors and windows and remove any heat sources. * Dirty filter screen: Clean or replace the filter. * Blocked air inlet or outlet: Remove any obstructions.
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 12, 000 BTU |
| BTU | 12, 000 |
| Coverage Area | 450 sq. ft. |
| Dehumidifier Function | Yes |
| Fan Speeds | 3 |
| Power Supply | 115V/60Hz |
| Control Type | Remote Control |
| Features | LED Display, Remote Control, Fan |
| Power Consumption | 1340 Watts |
| Operating Modes | Cooling, Dehumidifying, Fan |
| Installation Type | Window |
| Included Accessories | Exhaust Hose, Window Kit, Remote Control |
Essential guidelines for safe operation and handling of the air conditioner.
Identifies and lists the key physical parts of the portable AC unit.
Guides on positioning the unit and installing the exhaust duct.
Guidelines for cleaning the unit with a soft cloth and avoiding chemicals.
Instructions for cleaning the removable filter screen regularly for efficiency.
Lists error codes (E1, E2, E4) and their meanings for troubleshooting.
Provides solutions for common problems like no display, frequent starts, noise, and compressor issues.
To Next Page
