MANUAL DEL USUARIO • ASPID 150
11
Operación y aplicación de cada parte
Turn the button. thc odometer regress to O.
Speedometer 0
It is used to indicate the current speed in km/h.
Odometer®
It records the total mileage accum¬ulated since the motorcycle is used. One-way odometer C)
Make it to 0 by turning the begin bunommeasure the total mileage. Tachometer ®
It indicates the running speed of the engine in rpm.
High Ream Indicator®
The indicator will be lit when the High beam headlamp is switched on. Gear position Indicator CD
This indicator will show the current gear where the motorcycle is.
‘Rum signal indicater light ®
Ignition Switch
The ignition switch positions
“OFF” Position
The whole electrical circuit is disc¬onnected. Key could be pulled out. “ON” Position
To Next Page
Loading...
