EasyManua.ls Logo

Serpento ASPID 150 - Throttle Cable Clearance Adjustment; Clutch Adjustment

Serpento ASPID 150
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MANUAL DEL USUARIO • ASPID 150
31
Carburetor
The stability of carburetor contributes to the performance of the engine. The carburetor has been adjusted to the best state before leaving the
factory. Please do not attempt to make unnecessary adjustment. Note that the carburetor has two adjustment items which are throttle cable
clearance and idle speed. The new motorcycle should be adjusted according to the following method after running for 1,000 km or every 3,000
km. Adjustment of the Carburetor’s Idle Silted (rpm)
Carburetor idle speed adjustment
1. Start the engine and let it run to warm
2. Then adjust the idle screw and accelerate the engine up to 1500 rpm.
Note: If there is a tachometer, make adjustments as the above stated.
CAUTION
The idle speed should be adjusted with the engine fully warming up.

Table of Contents

Related product manuals