Serpento CLICK - G. Tire Inspection; H. Shock Absorber Inspection; I. Headlight and Taillight Inspection; J. Horn Inspection

24
G. TIRE INSPECTION:
• Check tire pressure if normal.
• Check if there is any metal trash or gravel inthe grooves of tires.
• If there is any crack or wearing exceeding the limit, replace the tire at once.
• While check the tire pressure, tire must be in cooling state.
• The main reason of going crack, unstable handle and abnormal abrasion are caused by the abnormal tire pressure.
• Do not overload to avoid tire explosion. If there is Normal Tire Pressure in it:
H. SHOCK ABSORBER INSPECTION:
• Add weight on the handle and seat, swing motorcycle up and down and check the front and rear shock absorbers if work well.
I. HEADLIGHT AND TAILLIGHT INSPECTION:
• Turn main switch to “ON”. Operate headlight switch to check if headlight and taillight light. Check the lights if any dirt or damage.
J. HORN INSPECTION:
• Turn main switch to “ON” and press down horn switch button to check if the horn sounds;