EasyManua.ls Logo

Serpento CLICK - D. Spark Plug Inspection

Serpento CLICK
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
NOTICE:
• Riding in the following will make oil quality become inferior and please change it earlier.
1) Always ride on gravel road.
2) Ride for a long distance.
3) Ride at the area with wet weather.
C.REPLENISHMENT OF BRAKE OIL: (DISK BRAKE)
• Turning the bike handle until the brake oil level in storage tank become horizontal.
• Remove the tank cover and seal.
• Replenish the specic brake oil up to the above of the mark “LOWER” ,then screw up the cover screws.
Brake oil: DOT-3.
• Assemble the sea), tank cover and upper handle cover.
D. SPARK PLUG INSPECTION:
NOTICE:
• Use only the specic brake oil. Otherwise, the rubber seal will be distorted and lead to oil leakage. The function will not work.
• Do not mix both specic and non-specic oils together, otherwise, it will cause a chemical reaction and lead to brake failure.
• Do not let the water penetrate into the main cylinder, otherwise, the boiling point will be lowered and lead to be choked.
• The painting surface and plastic parts will be corroded by the brake oil. In case of spilt, please be sure to clean promptly.
• Please nd out the problem with our distributor or service center if the standard level of brake oil is not able to reached.

Table of Contents

Related product manuals