EasyManua.ls Logo

Serpento CLICK - B. Gear Oil Change

Serpento CLICK
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
2. Oil change and filter cleaning:
• When to change oil and clean lter.
• Change oil and clean lter at rst 300km and every 1000km after.
Capacity of Oil
Disassembly: 0.91iter
General Change: 0.75liter
3. How to change oil and clean filter:
• Remove oil level gauge, Remove drain plug to make all the oil ow out. If engine is warm, it is easier to make oil ow out.
• Remove oil lter cap and take off spring and lter screen. Use high-pressured air to clean.
• Install oil ller and drain plug.
• Fill with new oil 0.9 liter. Check with oil level gauge. (Do, not screw in the gauge when check)
• Tighten up oil level gauge
• After engine becomes warm, stop running for 10-20 seconds. Recheck oil volume.
NOTICE:
• Please use SAE 1OW-30(SIGMA) oil.
• Riding in the following conditions will make oil become inferior and please change it earlier.
1) Always ride on gravel road.
2) Always ride for short distance.
3) Always run with neutral gear.
4) Ride at the area with cold weather.

Table of Contents

Related product manuals