Need help?Do you have a question about the Serta Works and is the answer not in the manual?
General| Type | Office Chair |
|---|---|
| Weight Capacity | 250 lbs |
| Upholstery | Fabric |
| Material | Plastic |
| Adjustable Features | Seat Height, Tilt Tension |
Key safety warnings and guidelines for using the chair to prevent injury.
Steps to take before assembly, including checking parts and preparing workspace.
List and visual identification of all chair components and hardware.
Assemble the chair base, casters, gas lift, and telescoping cover.
Fasten the left and right armrests to the seat cushion using M6x35MM screws.
Attach the seat plate to the bottom of the seat cushion with M6x20MM screws.
Secure the back cushion between the armrests using M6x25MM screws.
Place the assembled seat onto the gas lift and press down until fully engaged.
Periodically check and tighten all screws to ensure continued stability and safety.
Instructions on how to raise or lower the chair seat using the adjustment handle.
Guidance on engaging or disengaging the chair's tilt lock mechanism.
How to adjust the resistance of the chair's tilt mechanism using the round knob.
Information on the chair's 360-degree swivel functionality.
Diagram showing the overall height, width, and depth measurements of the chair.
Details on warranty coverage, limitations, exceptions, and how to make a claim.
To Next Page