EasyManua.ls Logo

SEVERIN CY7086 - Operation 20

SEVERIN CY7086
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
oPeraTion
3 Operation
Assembly or replacement of accessories
Only assemble appliance parts when the power plug has been disconnected from the socket.
Only use undamaged nozzles. Damaged nozzles can scratch surfaces.
For additional assembly tips, see > illustrated Quick Start Guide.
When vacuuming
Make sure that you are always above the appliance, especially when vacuuming stairs. Otherwise the
appliance may fall down and cause injuries.
Only use the appliance with lters in place.
Follow the cleaning and maintenance instructions of the oor covering, carpet or furniture manufacturer!
Never pull out connection cable beyond yellow marking. If the blue marking is visible, press the cable
rewind button to retract the cable to the yellow marking . Otherwise, the connection cable may be overstrained
and damaged.
Light on ON/OFF switch is green: Appliance is switched on and lters are clean.
When retracting the connection cable, hold the power plug in your hand and guide it in the winding
direction. Otherwise the connection cable can ing about, injure persons nearby, become a trip hazard or pull
over objects.
Always ensure that the nozzle suitable for the surface is in place and the correct suction power is set.
If an object has accidentally been suctioned up, quickly actuate the
bypass vent on the handle (Fig. 1) to reduce the suction power.
For additional tips on operation, see > illustrated Quick Start Guide.
1

Table of Contents

Related product manuals