Need help?Do you have a question about the SEW-Eurodrive FA157 and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | FA157 |
| Category | Engine |
| Language | English |
Provides general safety information regarding hazards and operations.
Specifies intended industrial use and compliance with directives.
Outlines checks and procedures before and during startup.
Refers to the "Inspection/Maintenance" section for details.
Checklist for activities prior to startup in potentially explosive atmospheres.
Checklist for activities during startup in potentially explosive atmospheres.
Explains the information presented on the product nameplate.
Lists conditions that must be met before assembly.
Provides instructions for installing the gear unit.
Specifies ambient temperature limits for category II2D gearmotors.
Provides notes on installing shafts with keyways or splined hollow shafts.
Notes on installing gear units with shrink disks, including precautions.
Instructions for checking the oil level before startup.
Procedures for measuring surface and oil temperatures during startup.
Notes to observe before starting inspection or maintenance tasks.
Specifies intervals and tasks for inspection and maintenance.
Shows lubricant change intervals based on operating hours and temperature.
Procedure for checking and changing oil based on unit type and position.
Lists common gear unit malfunctions, their causes, and remedies.
To Next Page