Need help?Do you have a question about the SEW-Eurodrive FA87 and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | FA87 |
| Category | Engine |
| Language | English |
Highlights risks from unauthorized cover removal, improper use, and incorrect installation/operation.
Provides checks before startup and actions for unusual changes during operation.
Detailed checklist for activities required before startup in potentially explosive atmospheres.
Checklist for activities to be executed during startup in potentially explosive atmospheres.
Ensures correct conditions, nameplate matching, and no damage before commencing assembly.
Guidelines for installing gear units in specified positions, support structure, and screw quality.
Details on ambient temperature, temperature class, and surface temperature for II2GD units.
Covers installation for keyway, shrink disk, and TorqLOC® shaft-mounted gear units.
Ensures the oil level corresponds to the mounting position before starting the gear unit.
Procedure for measuring surface and oil temperatures at maximum load during startup.
Purpose of backstop, permitted rotation, and cautions about operating in the blocking direction.
Instructions for installing, adjusting, and setting the speed monitor to switch off the drive below 95% rated speed.
Illustrates installing the voltage encoder and setting the switching interval 'x' for signal pulses.
Table detailing tasks and intervals for checking seals, oil level, and replacing components.
Shows lubricant change intervals based on operating hours and sustained oil bath temperature.
Guides oil checks and changes based on unit type, size, mounting position, and plug presence.
Table listing permitted lubricants, their types, and abbreviations for various gear units.
Lists malfunctions like unusual noise and oil leaks, with their causes and corresponding service actions.
To Next Page