Need help?Do you have a question about the SEW-Eurodrive FA97 and is the answer not in the manual?
General safety warnings regarding operation and installation.
Checklist for activities before startup in potentially explosive atmospheres.
Checklist for activities during startup in potentially explosive atmospheres.
Explanation of nameplate information and special ATEX indications.
Conditions to be met before starting assembly for standard and special versions.
Guidelines for installing gear units, including support structure and screw quality.
Specific installation notes for gear units with solid shafts.
Installation notes for shaft-mounted gear units utilizing shrink disks.
Installation procedures for gear units featuring the TorqLOC® system.
Information on installing adapters with torque limiting couplings.
Procedure for checking the oil level before initial startup.
Guidelines for measuring surface and oil temperatures during startup.
Information on installing and adjusting speed monitoring systems.
Procedure for installing and setting the voltage encoder.
Safety and preparatory notes before performing inspection/maintenance.
Table of inspection/maintenance tasks based on time intervals.
Graph showing lubricant change intervals based on temperature and hours.
Maintenance intervals and tasks for AR adapters, including friction lining.
General information on gear unit inspection and maintenance.
Illustrates the six mounting positions (M1-M6) for gear units.
General safety warnings regarding operation and installation.
Checklist for activities before startup in potentially explosive atmospheres.
Checklist for activities during startup in potentially explosive atmospheres.
Explanation of nameplate information and special ATEX indications.
Conditions to be met before starting assembly for standard and special versions.
Guidelines for installing gear units, including support structure and screw quality.
Specific installation notes for gear units with solid shafts.
Installation notes for shaft-mounted gear units utilizing shrink disks.
Installation procedures for gear units featuring the TorqLOC® system.
Information on installing adapters with torque limiting couplings.
Procedure for checking the oil level before initial startup.
Guidelines for measuring surface and oil temperatures during startup.
Information on installing and adjusting speed monitoring systems.
Procedure for installing and setting the voltage encoder.
Safety and preparatory notes before performing inspection/maintenance.
Table of inspection/maintenance tasks based on time intervals.
Graph showing lubricant change intervals based on temperature and hours.
Maintenance intervals and tasks for AR adapters, including friction lining.
General information on gear unit inspection and maintenance.
Illustrates the six mounting positions (M1-M6) for gear units.
General| Brand | SEW-Eurodrive |
|---|---|
| Model | FA97 |
| Category | Engine |
| Language | English |
To Next Page