Need help?Do you have a question about the SEW-Eurodrive MOVIDRIVE MDV60A and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | MOVIDRIVE MDV60A |
| Category | DC Drives |
| Language | English |
Details the five main states of the internal synchronous operation state machine.
Lists general requirements for project planning, including software and hardware.
Explains how to connect the master incremental encoder to the MOVIDRIVE® slave.
Details the X14-X14 connection between MOVIDRIVE® master and slave units.
Describes the SBus connection requirements and specifications for master/slave communication.
Overview of activating internal synchronous operation via parameter P916.
Presents the main state machine for internal synchronous operation with its five main states.
Details different modes for controlling the startup cycle process.
Details startup cycle modes (manual, event-driven, interrupt-controlled) via system variables.
Explains stop cycle modes (manual, event-driven) and control variables.
Manages and applies offsets in synchronous operation based on time or travel.
Explains offset control reaction to events and settings via system variables.
Describes control via P-controller, feedforward, and limiting for synchronous operation.
To Next Page
