Need help?Do you have a question about the SEW-Eurodrive MOVIMOT D EtherNet/IP and is the answer not in the manual?
General| Communication Protocol | EtherNet/IP |
|---|---|
| Power Range | 0.37 kW to 4.0 kW |
| Control Method | Vector control |
| Storage Temperature | -25°C to +70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Category | DC Drives |
| Type | MOVIMOT D |
| Input Voltage | 380 V to 500 V AC |
| Protection Class | IP65 |
| Operating Temperature | +40°C |
Outlines the content and purpose of the documentation for EtherNet/IP™ interfaces and field distributors.
Details the grading and meaning of signal words and the structure of section-related safety notes.
Provides initial safety considerations, primarily for MFE62 EtherNet/IP™ interfaces/field distributors.
Covers essential safety guidelines to prevent injury and damage, including handling damaged products.
Defines qualified personnel authorized for installation, startup, troubleshooting, and maintenance.
Specifies that field distributors and interfaces are for installation in electrical systems or machines.
Details notes on transportation, storage, proper handling, and climatic conditions.
Instructs on unit installation and cooling according to regulations and specifications.
Emphasizes adherence to national accident prevention guidelines for electrical connections.
Confirms compliance with protective separation requirements for power and electronics connections.
Outlines operational requirements, including monitoring devices and avoiding contact with live components.
Provides specific safety notes for different types of field distributors (MFZ.3, MFZ.6, MFZ.7, MFZ.8).
Explains the type designation of the MFE62A/Z21D fieldbus interface with coding examples.
Illustrates type designations for MF../Z.3. and MF../Z.6. field distributors with examples.
Provides general instructions for assembly and installation in damp locations or outdoors.
Details installation methods for MF../MQ.. fieldbus interfaces on MOVIMOT® connection boxes and in the field.
Shows mounting dimensions for various field distributor types (MF../Z.3., MF../Z.6., MF../Z.7., MF../Z.8.).
Covers notes on arranging and routing components for EMC-compliant installation.
Provides guidance on connecting supply system leads, PE connection, and terminal capacities.
Details the wiring and terminal assignment for connecting MFZ21 to MFE62 and MOVIMOT®.
Explains the connection of MFZ23 with MFE62 using separate or shared DC 24 V circuits.
Details connections for MFZ26/27/28 with MFE62 using separate or shared DC 24 V circuits.
Describes connecting inputs/outputs via terminals and M12 plug connectors for the MFE62 interface.
Shows the connections of the EtherNet/IP™ bus, including port pin assignments.
Explains hybrid cable connections for field distributors to MOVIMOT® drives and AC motors.
Details connecting a PC/Laptop via USB adapter for startup, parameter setting, and service.
Provides a checklist for wiring verification before connecting the voltage supply.
Offers general startup instructions with critical safety warnings and information.
Explains IP addressing, network classes, subnet masks, and standard gateway settings.
Guides on setting IP address parameters during initial startup and changing them afterward.
Provides a step-by-step procedure for starting up the MOVIMOT® inverter and EtherNet/IP™ interface.
Explains the status of LEDs on the MFE EtherNet/IP™ interface for diagnostics.
Lists common error codes, their causes, responses, and recommended measures for fieldbus interfaces.
Formal declaration confirming product conformity with relevant EU directives and harmonized standards.
To Next Page