SEW-Eurodrive MOVISAFE CSS31A

Need help?

Do you have a question about the SEW-Eurodrive MOVISAFE CSS31A and is the answer not in the manual?

Summary

Safety Concept

MOVISAFE CS..A safety concept

Drive safety functions according to EN 61800-5-2

Details the available drive safety functions and their implementation.

Safety Requirements

Installation requirements

Requirements for stopping in an emergency

Details requirements for implementing emergency stop functions as per EN 60204-1.

Mechanical Installation

Installation of the MOVISAFE CS..A safety card

Details the procedure for installing the safety card into MOVIDRIVE® modular units.

Electrical Installation

Installation instructions

Terminal assignment

Safe digital inputs (F-DI.)

Explains the configuration and operation of safe digital inputs.

Safe digital outputs (F-DO.)

Explains the configuration and operation of safe digital outputs.

Startup

General startup instructions

Parameterization of the drive safety functions

Describes the step-by-step process for parameterizing drive safety functions.

Startup of the safety card at the F-protocol

Safety-relevant acceptance

Outlines the process and importance of safety-related acceptance testing.

Operation

Hazard caused by coasting of the drive

Addresses the safety hazards associated with drive coasting and necessary precautions.

Service

Error states of the MOVISAFE CS..A safety card

Details various error classes and their corresponding fault responses.

Fault diagnostics

Describes methods for diagnosing and interpreting faults using MOVISUITE® and PROFIsafe.

Technical Data

Safe digital inputs

Safe digital outputs

Characteristic safety values

Presents safety-related values according to EN 62061 and EN ISO 13849-1.