Need help?Do you have a question about the SEW-Eurodrive MOVITRAC B MC07B0075-5A3-4-00 and is the answer not in the manual?
General| Type | Frequency Inverter |
|---|---|
| Model | MOVITRAC B MC07B0075-5A3-4-00 |
| Power Rating | 0.75 kW |
| Frequency Range | 0-400 Hz |
| Enclosure Type | IP20 |
| Protection Class | IP20 |
| Input Voltage | 380-480 V AC |
| Output Voltage | 0-480 V AC |
| Control Method | Vector control |
| Communication Interface | RS-485 |
Details the key features and properties of MOVITRAC® B frequency inverters.
Lists general technical specifications applicable to all MOVITRAC® B sizes.
Details the terminal assignments and electronic data for MOVITRAC® B inverters.
Provides electronics data specific to functional safety inputs and outputs.
Presents an overview of MOVITRAC® B technical data based on power supply and size.
Covers BW braking resistors, their general information, PTC resistors, and flat design.
Discusses connecting MOVITRAC® B units to fieldbus systems via gateways.
Introduces the MOVI-PLC® controller, its unit types, and description.
Explains how to access and interpret parameters, including symbols and factory settings.
Details parameters for motor protection, including thermal monitoring.
Explains the assignment of binary inputs and outputs for control signals.
Parameter for setting the basic operating mode of the inverter (VFC, V/f, Hoist).
Explains how MOVITRAC® B controls the motor brake.
Details parameters for programming fault responses to external faults.
Outlines a step-by-step procedure for schematic planning of a drive system.
Guides on selecting the appropriate motor based on voltage-frequency characteristics and dynamic applications.
Explains the overload capacity of MOVITRAC® B inverters under different conditions.
Provides guidance on selecting appropriate braking resistors, including safety and connection information.
Covers permitted voltage supply systems and line contactors/fuses.
Explains EMC requirements and measures for compliant installation.
Explains HF output filters for smoothing output voltage and important notes for their use.
Shows the priority of operating states and how control signals interact.
Introduces the PI controller and its basic structure for applications like temperature or pressure control.
Presents practical examples of applying MOVITRAC® B inverters.
Details installation requirements, cooling, and protection from strain and electrostatic discharge.
Covers electrical connection guidelines, including cable cross-sections, fusing, and EMC considerations.
Introduces optional power components like input contactors and line chokes.
Presents wiring diagrams for various MOVITRAC® B configurations and connections.
Covers general requirements, hoist application considerations, and preliminary work for startup.
Explains how to enable the motor via terminals after exiting manual operation.
Guidance on startup for explosion-proof motors, requiring specific approvals and software.
Provides a simplified procedure for startup using factory settings and direct motor connection.
Explains the key arrangement, functions, and operation of the FBG11B keypad.
Provides a guide for startup using the DBG60B keypad, including data input and language selection.
Guides on performing startup using MOVITOOLS® MotionStudio software via PC connection.
Explains how to select external setpoints via terminals, serial interface, or potentiometer.
Provides a comprehensive list of all parameters accessible via the FBG keypad and MOVITOOLS®.
Explains procedures for backing up parameter data using FBG11B, DBG60B, and UBP11A.
Describes the status displays on the basic unit and FBG11B keypad, including LED codes and unit status.
Explains the basic displays and information messages shown on the DBG60B keypad.
Provides information about the unit, including error memory and switch-off responses.
A comprehensive list of error codes, their designations, possible causes, and measures to resolve them.
Provides contact information and procedures for SEW electronics service, including hotline and repair information.
To Next Page