Need help?Do you have a question about the SEW-Eurodrive MOVIDRIVE and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Series | MOVIDRIVE |
| Output voltage range | 0 V to input voltage |
| Output frequency range | 0 – 650 Hz |
| Protection class | IP20 |
| Communication interfaces | CANopen |
| Control modes | V/f control |
| Storage temperature range | -25°C to +65°C |
| Relative humidity | ≤ 95 %, no condensation |
| Altitude | Up to 1000 m above sea level (without derating), Up to 4000 m above sea level (with derating) |
Details the content of the operating instructions, emphasizing safety notes and selected inverter information.
Explains signal words and hazard symbols for clear communication of risks in safety notes.
General purpose of safety notes: preventing injury to persons and damage to property.
User responsibilities for safety compliance and ensuring qualified personnel perform tasks.
Defines qualifications for specialists and instructed persons for safe operation and handling.
Guidelines to prevent unauthorized access to networked drive components and ensure system safety.
Specifies intended installation and operational use of the product, including limitations and applications.
Information on the product's role in safety functions, requiring a higher-level safety system.
Instructions for inspecting shipment for damage and observing notes during device transport.
Guidance on product installation and assembly, ensuring proper cooling and protection from mechanical strain.
Key considerations for electrical installation, including cover attachment, preventive measures, and regulatory compliance.
Requirements for protective separation of power and electronics connections according to EN 61800-5-1.
Safety notes for startup and operation, including handling live components, hot surfaces, and restarts.
Specific instructions for lifting and transporting inverters of different sizes to prevent damage.
Instructions and precautions for the mechanical installation of the inverter, including checking for damage.
Crucial safety information for electrical installation, including residual voltage dangers and shock current prevention.
Information and safety warnings related to braking resistors, including high voltage and temperature dangers.
Detailed terminal assignments for different inverter sizes for power and control connections.
Illustrates power connection diagrams, including components like line contactors, chokes, and filters.
Procedure for assigning a decimal EtherCAT® ID using hexadecimal switches S1 and S2 for device identification.
Lists requirements for inverter startup, including correct installation, configuration, and safety measures.
General safety warnings for operation, highlighting dangers of live voltages, hot surfaces, and unintentional motor starts.
Explanation of 7-segment display states during boot process and device states for status monitoring.
Information stating that the device is maintenance-free for extended storage periods.
Procedure for shutting down the inverter, emphasizing de-energization and minimum switch-off time.
To Next Page
