402
System Manual – MOVIDRIVE® MDX60B/61B Drive Inverters
10
General startup instructions
Startup
10 Startup
10.1 General startup instructions
Prerequisites
The drive must be configured correctly to ensure that startup is successful. Refer to the
MOVIDRIVE
®
MDX60/61B System Manual for detailed project planning notes and an
explanation of the parameters.
VFC operating
modes without
speed control
MOVIDRIVE
®
MDX60/61B drive inverters are designed to be taken into operation with
the SEW motor which is adapted to the correct power level. The motor can be connected
and the drive started immediately in accordance with the section "Starting the motor"
(→ page 409) .
DANGER!
Uncovered power connections.
Severe or fatal injuries from electric shock.
• Install the touch guard according to the regulations.
• Never start the unit if the touch guard is not installed.
NOTE
The startup functions described in this section are used for setting the inverter so it can
be adapted optimally to the motor that is connected and to suit the basic conditions.
00
I
To Next Page
Need help?
General
