Need help?Do you have a question about the SEW Movitrac B and is the answer not in the manual?
Provides details on the purpose and structure of the documentation and how to obtain further information.
Covers general safety precautions for frequency inverters, including qualified personnel, handling, and prohibited applications.
Provides a detailed breakdown of connections and components for MOVITRAC® B units of sizes 0XS, 0S, and 0L.
Details installation requirements, protection from strain, handling of electronic components, and prohibited applications.
Covers requirements for successful startup, including motor connection, parameter settings, and safety precautions.
Guides on exiting manual mode and enabling the motor via terminals, including analog setpoint and fixed setpoint specifications.
Describes digital access to drive parameters and functions via communication interfaces, including process data and fieldbus systems.
Specifies how to set the direction of rotation using terminals or process data word polarity.
Lists parameters related to displaying process values like speed, frequency, and output current.
Explains procedures for backing up parameter data using FBG11B, DBG60B, UBP11A, and MOVITOOLS® MotionStudio.
Provides a comprehensive list of faults, their responses, possible causes, and recommended measures for troubleshooting.
Covers CE marking, UL approval, C-Tick, general technical data, and installation altitude.
Formal declaration that MOVITRAC® B frequency inverters comply with relevant EC directives and harmonized standards.
Lists SEW-EURODRIVE headquarters, production, sales, and service locations within Germany.
General| Protection Rating | IP20 |
|---|---|
| Communication Interfaces | CANopen, PROFIBUS DP, Modbus RTU |
| Braking Resistor | Optional external braking resistor |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit, ground fault |
| Ambient Temperature | -10 °C to +50 °C (derating may be required at higher temperatures) |
To Next Page